|
|
|
Communicating with the MCP3221 using Picmicro® MicroControllers - Microchip
Application Note Published 2-Aug-02 (app note added 2/06) |
|
Comparing can & Ecan Modules - Microchip Application Note Published 5-Mar-04
(app note added 2/06) |
|
Comparison of Low End 8 Bit MicroControllers - Microchip Application Note
Published 26-Aug-97 (app note added 2/06) |
|
Compass Schematic - (electronic diagram added 6/03) |
|
Configuring the TMC22x5y to Pass Closed Caption Data/ AN-52 - Fairchild
Application Notes / (app note added 6/06) |
|
Connecting a Picmicro® MicroController to a Standard Analog Telephone Line -
Microchip Application Note Published 21-Aug-02 (app note added 2/06)
|
|
Connecting LED to PIC Micro I/O Pins - So, you’ve got a great idea for a
project using a PICmicro microcontroller and you want to use at least one LED in your
project as a power indicator. Or, maybe, you’ve set out to design a bar-graph
voltmeter with eight LEDs,.....(app note added 11/03) |
|
Connecting PIC12c508 8 to 93AA46 Serial Eprom - (schematic / circuit added
11/03) |
|
Control 120 Volt AC Relay with TTL - ASCII format (circuit / schematic
design added 6/06) |
|
control room light intensity - 11/11/04 EDN-Design Ideas.....Many people
favor different light and temperature settings for different rooms depending upon
their mood or whether they are working or relaxing. The circuit in Figure 1 controls
the intensity of the artificial light in a room and monitors the temperature of two
zones. The two main circuit blocks are the PIC16C67 master controller and the ADT7516
temperature-sensor interface, which includes a..... EDN is migrating links. This link
is not verified. Search the "title" + "EDN" for new link. |
|
Converting from 8051 to Microchip Assembler: A Quick Reference - Microchip
Application Note Published 8-Oct-03 (app note added 2/06) |
|
Converting from Motorola® Hc08 to Microchip Assembler: A Quick Reference -
Microchip Application Note Published 9-Jul-03 (app note added 2/06) |
|
Converting Light to Digits: LTC1099 Half-Flash 8-Bit A/D Converter Digitizes
Photodiode Array - AN33 Linear Technology This application note
describes a Linear Technology "Half-Flash" A/D converter, the LTC1099, being connected
to a 256 element line scan photodiode array. This technology adapts itself to
handheld (i.e., low power) bar code readers, as well as high resolution automated
machine inspection applications.....[App Note] |
|
Convolution Digital Signal Processing - National Semiconductor Application
Note (app note added 2/06) |
|
COP444l Evaluation - National Semiconductor Application Note (app note
added 2/06) |
|
Correlating software & analog outputs in a CAN Controller - Agilent
Application Note.....[App Note] |
|
Correlator works in Presence of Noise - 02/03/94 EDN-Design
Ideas.....Clipped-signal Correlator outperforms any resistor-capacitor clipped-signal
Correlator, and the circuit has no race paths..... [Design Idea by John Charlton,
Lancaster, CA] |
|
CRC Generating & Checking - Microchip Application Note Published 22-May-00
(app note added 2/06) |
|
Creating a Multitasking Kernel for the COP8 MicroController - National
Semiconductor Application Note (app note added 2/06) |
|
Credit Card Reader using PIC12c509 - Microchip Application Note Published
28-Oct-99 (app note added 2/06) |
|
Cross Plot Generator Allows Quick A/D Converter Evaluation - AN-101 Analog
Devices Application Notes (app note added 2/06) |
|
Crowbars & Clamps - MicroNote 106 from Microsem Reviews the major
differences including the low on-state voltage of the crowbar and the ease of
transition from conduction to non-conduction for the clamp. Trade-offs and
applications are discussed. (app note added 6/06) |
|
Current-Limit Switch Is Digitally Programmable - Current-limit switches are
virtually ubiquitous in system controls. They provide a safe means for regulating the
current delivered to a load circuit. The switches allow the load current to increase
to a programmed limit but no higher. This application note illustrates the
implementation of a digitally programmable current-limit switch using MAX890L a
current-limited, high-side P-channel switch and MAX5160 digital
potentiometer.....[Maxim Application Note 298 |
|
Current-source is Nonvolatile - 05/07/02 EDN-Design Ideas.....Digitally
programmable current sources that feature automatic trimming and retain the setting
despite power-down cycles are useful in applications such as RFand
laser-communications drivers. The circuit in Figure 1, for example, is particularly
suited for setting the drive current for the optical pump in widely tunable VCSELs
(vertical-cavity surface-..... EDN is migrating links. This link is not verified.
Google the "title" EDN for new link. |
|
Customize Digital Modulation with the Esg-D Series Real-Time I/Q Baseband Generator,
Option Un8 - Aligent Application Note (app note added 6/07)
|
|
|
