|
|
|
Weighscale - (electronic schematic / circuit added 4/02)
|
|
Wind gauge - Scroll down to find link to circuit drawing and
circuit explanation….(electronic circuit added 08/08/08) |
|
Wireless controlled light dimmer - The meaning from this design is
to build it in -i.e. a shaded lamp- and to switch this lamp on and off the
normal way, just like it was switched before the dimmer was build in, then
you could by exception dimming the lamp more or less with your TV remote
control. When you switch the power on there will follow a soft-start till
the lamp burns at the previously adjusted dim level. With the '0' button in
TV mode you can dim the lamp, turn more and less bright. The remote control
should send more then one RC5-signal per button-press seeing that the first
one is ignored, this does imply that when the remote button is pressed a
short time, there nothing happens. With the P+ and P- button from a system
at choice you can adjust the maximum and minimum dim-levels and with the '1'
button the start-up brightness. ….(electronic schematic added 11/08)
|
|
|
|
Wireless Home Security Implementing KEELOQ® & the PICmicro® MicroController -
Microchip Application Note Published 12-Oct-99 (app note added 2/06)
|
|
|
[_OLD-ads-dont_upload/OLD I-ADS from web/ad-djandassoc.htm] |
|
|
Wireless local network for PalmPilot large PDF - (electronic circuit added
4/05) |
|
Wisp628 ISP Microchip PIC Programmer - (electronic circuit added 7/03)
|
|
WLoader: PIC16F877 application loader/Bootloader - (electronic circuit added
4/05) |
|
X-10 Home Automation using the PIC16F877a - Microchip Application Note
Published 30-Oct-02 (app note added 2/06) |
|
xTimer V1.0 - 4-Channel Timer, 89C4051 + MAX7219 display driver.
….(design added 06/09) |
|
xTimer V1.0 with 4094 - New design xTimer using CMOS shift register 4094 for
driving 7-segment LED directly! . ….(electronic schematic added 06/09) |
|
Yo-Yo Device - At about $1.08 each in small quantities, the PIC12F629 is
just begging to be used in small and strange projects. The original yoyo was equiped
with 2 LEDs that lit up when the device was spinning. I decided to add a micro
to give it some extra pazazz.…. [Luhan Monat - Mesa Arizona] |
|
|
