|
|
|
Several stepper Motor Control circuits - (electronic circuit added
4/05) |
|
Simple circuit controls stepper-motors - 8-Jan-04 Issue of EDN
Stepper motors are useful in many consumer, industrial, and military
applications. Some, such as personal-transportation systems, require precise
speed control. Stepper-motor controllers can be simple (Figure 1], but they
require a variable-frequency square wave for the clock input. The AD9833
low-power DDS (direct-digital-synthesis] IC with an on-chip, 10-bit DAC is
ideal for this task, becaus.... [Design Idea by Noel McNamara, Analog
Devices, Limerick, Ireland] |
|
Simple stepper Motor Controller - This design allows for very
precise control of the motor: by proper pulsing, it can be turned in very
accurate steps of set degree increments (for example, two-degree increments,
half-degree increments, etc.). They are used in printers, disk drives, and
other devices where precise positioning of the motor is necessary. There are
two basic types of stepper motors, unipolar steppers and bipolar
steppers.... |
|
Solarbotics NV-Based Circuit - uses a single IC (and it's a common
one, too -the 74AC240) to give you motor drive in a single direction
(added 11/05) |
|
|
|
Step Motor Controller - This Application Note describes how to implement a
compact size and high-speed interrupt driven step motor controller. Step motors are
typically used in applications like camera zoom/film feeder, fax machines, printers,
copying machines, paper feeders/ sorters and disk drives. The high performance of the
AVR controller enables the designer(app note added 3/05) |
| Step Up/Step Down Converter Takes 2 to
16V Inputs - 07/16/98 EDN-Design Ideas....The circuit in Figure 1 is a
low-cost step-up/step-down dc/dc converter. By definition, its input can range above
and below the regulated voltage. The circuit includes a simple switchmode boost
converter (IC1] that contains a comparator normally used to detect low battery
voltagenThis file contains several circuits, scoll to find this one.... [Design Idea
by Lucian Brodogna and Luca Vasalli. Maximin Integrated Products, Milan Italy] |
|
Stepdown converter uses a ceramic output capacitor - 06/07/01 EDN-Design Ideas
EDN is migrating links. This link is not verified. Search the "title" + "EDN"
for new link. |
|
Stepper Control - ….(design added 07/08/09) |
|
Stepper Motor Connections - Stepper motors are available in many different
models. One of the main differences is the number of connections. That can vary from 4
to 8 wires or terminals. The oldest models, for the unipolar drives have 5 or 6
leads….(electronic circuit added 08/08/08) |
|
Stepper Motor Control using the PIC16F684 - Microchip Application Note Published
23-Feb-04 (app note added 2/06) |
|
Stepper Motor Controller - Stepper motor driver that will allow you to
precisely control a unipolar stepper motor through your computer's parallel port. With
a stepper motor you can build a lot of interesting gadgets such as robots, elevator,
PCB drilling mill, camera panning system, automatic fish feeder, etc. If you have
never worked with stepper motors before you will surely have a lot of fun with this
project. ….(electronic schematic added 11/08) |
|
Stepper Motor Controller - The direction of rotation is determined by the
FORWARD and REVERSE switches and the motor does not take any current when a switch is
not pressed. |
|
Stepper Motor Controller (Aaron Cake) - (circuit / schematic design added
4/05) |
|
Stepper Motor Controller (interg) - There are many kind of stepper motors.
Unipolar type, Bipolar type, Single-phase type, Multi-phase type. Single-phase stepper
motor….(electronic circuit added 08/08/08). |
|
Stepper Motor Controller Connection Diagrams - Four-Wire Connection The
ULN2003 / MC1413 is a 7-bit 50V 500mA TTL-input NPN darlington driver. This is
more than adequate to control a four phase unipolar stepper motor such as the
KP4M4-001.….(electronic circuit added 08/08/08) |
|
Stepper Motor Drive - (application / block diagram added 6/07) |
|
Stepper Motor Driver (74194) - Probably the simplest, reversible drive
circuit is the H-Bridge. Some BEAMbots use H-bridge motor drivers; many more use an
H-bridge variant of some sort. Here's a simple conceptual schematic: Image Based on
the SN74LS194, Bidirectional Universal Shift Register the circuit is designed to drive
UNIPOLAR type stepper motors and provides only basic control functions, Forward,
Reverse, Stop and Speed adjustment. The only step angle for this driver is the design
step angle for the motor. The circuit is not complex and is cheaper than many
dedicated driver/controller devices and the parts are easy to find. ….(design added
11/08) |
|
Stepper Motor Driver using L298 & L297 - (electronic circuit added 4/05)
|
|
Stepper Motor Driver using TEA3718/3717 - (electronic circuit added 4/05)
|
|
Stepper Motor Experiment - (circuit / design added 8/03) |
|
Stepper Motor Microstepping with PIC18C452 - Microchip Application Note
Published 21-Mar-02 (app note added 2/06) |
|
Stepper Motor Positioner - (electronic schematic / circuit added 4/02)
|
|
Stepper Motor Voltage Doubler Circuit - Double the voltage from a stepper
motor using two bridge rectifiers…. [REUK - Renewable Energy UK website] |
|
Stepper Motor winpenny - (electronic design added 6/07) |
|
Stepper-motor motion controller and driver fit into a CPLD/FPGA - 21-Jun-07
Issue of EDN A CPLD or FPGA can be a home for a stepper-motor motion controller
and driver.... [Design Idea by Stephan Roche, Santa Rosa, CA] |
|
Stepping Motor Controller - Intelligent stepper motor controller with
PIC16F84. It can be controlled with PC that conncted with RS-232C. And it can also set
up acceleration value, maximum velocity and drive method. (added 10/05)
|
|
Stepping Motor Driver - Minimalist circuit uses one CMOS gate and is
reversible [Circuit by Stepan Novotill] |
|
Stepping Motors Fundamentals - Microchip Application Note Published
23-Feb-04 (app note added 2/06) |
|
Step-up supply charges battery while serving load - 06/08/95 EDN-Design
Ideas....The circuit in Fig 1 supports portable applications in which a microprocessor
controls battery charging. Step-up switching regulator IC1 boosts VIN (5V]to supply a
combination of charging and load current. (Note that the 5V source must have
short-circuit protection.]IC2 is a high-side current-sense amplifier that monitors
charging current.... [Design Idea by Dana Davis, Maxim Integrated Products, Sunnyvale,
CA] |
|
Super Simple Stepper Motor Controller - (circuit / schematic design added
6/06) |
|
The HC11 Controls the Stepper - (circuit / schematic design added 07/08/09)
|
|
Two Components Drive Stepper Motor - 01/19/95 EDN-Design Ideas.... EDN is
migrating links. This link is not verified. Search the "title" + "EDN" for new
link. |
|
Using COP800 Devices to Control DC Stepper Motors - National Semiconductor
Application Note (app note added 2/06) |
|
working With Stepper Motors - We've all experimented with small "hobby
motors", or free-spinning DC motors. Have ….(electronic circuit added 08/08/08)
|
|
XYZ Stepper Motor Driver Board - (schematic added 09/08) |
|
|
