|
Using the
AD2S80 Series Resolver to Digital Converters with Synchro's; Solid State Scott-T Circuit. - AN-252 Analog Devices App Note. . .
Using the AD2S80 Series Resolver-to-Digital Converters as Control Transformers - AN-203 Analog Devices App Note. . .
Using the
AD650 Voltage-to-Frequency Converter as a Frequency-to-Voltage Converter - AN-279 Analog Devices App Note. . .
Using the AD771X Family of 24-Bit Sigma-Delta A/D Converters - AN-406 Analog Devices App Note. . .
Using the AD7782 in Low Power Applications - AN-614 Analog Devices App NoteThis application note describes how to use the AD7782 in
portable or low power applications. . . .
Using
the AD7877 Touch Screen Controller & the Intel PXA250 Processor Under Windows CE.NET - AN-738 Analog Devices App Note. . .
Using the Analog-to-Digital Converter - Application Note Published 26-Aug-97. . . [Microchip]
Using the MCP320x 12-Bit Serial A/D Converter with Microchip Picmicro® Devices - Application Note Published 22-Nov-99. . . [Microchip]
Using the
Noise Reduction Feature on the AD7877 - AN-766 Analog
Devices App Note. . .
Variable Gain
Noninverting Amplifier Using the AD5292 Digital Potentiometer and the OP184 Op Amp
- In this case, the digital potentiometer is configured in the ratiometric
mode. , Circuit Description, Circuit Description, The circuit gain is defined in Equation 4: where D is the code
loaded in the digital potentiometer. A gain plot vs. code is shown in Figure 5. . . [Analog Devices-
from the Lab]
Video Formats
& Required Load Terminations - AN-205 Analog Devices App
Note. . .
Watt-Hour
Energy Meter Based on the AD7755 Chinese Version-5/2000 -
AN-559 Analog Devices App Note. . .
Weigh Scale Design Using
the AD7780 24-Bit Sigma-Delta ADC with Internal PGA -
Using LabView software, the perfor-mance of the weigh scale system can be evaluated. The noise of the system is
calculated by the software to 50 nV rms. This equates to 30, 300 noise-free counts or 14. 9 bits of noise-free
code resolution. , Circuit Description , Figure 4 shows the performance in terms of weight. . . [Analog
Devices-Circuits from the Lab]
Weigh Scale Design Using
the AD7781 20-Bit Sigma-Delta ADC with Internal PGA -
Using LabView software, the perfor-mance of the weigh scale system can be evaluated. The noise of the system is
calculated by the software to be 50 nV rms. This equates to 30, 300 noise-free counts or 14. 9 bits of noise-free
code resolution. , Circuit Description , Figure 4 shows the performance in terms of weight. . . [Analog
Devices-Circuits from the Lab]
Which ADC
Architecture Is Right for Your Application? - Analog
Devices-Analog Dialogue. . . [by Kester, Walt]
Wide Dynamic Range A/D Converters Pave the Way for Wideband Digital Radio Receivers - 11/07/96 EDN Design FeatureWith recent advances in data conversion, mixers, and DSPs,
digital radios are becoming more commonplace. But what are digital radios, how do they work, and how do they
differ from analog radios?. . . [by Brad Brannon, Analog Devices Inc]
<<<< Previous
PAGE |
