DiscoverCircuits.com, has 40,000+ electronic circuits, cross-referenced
into 500+ categories. We have searched the web to help you find quick design ideas.
We make every effort to link to original material posted by the designer. Please let us if you would like us to link to or post your design.
AN-345: Grounding for Low-and-High-Frequency Circuits - AN-345
Analog Devices Application Notes....[App Note]Know Your Ground and Signal
Paths for Effective Designs. Current Flow Seeks Path of Least Impedance-Not
Just Resistance....
AN-347: Shielding & Guarding - AN-347 Analog Devices Application
Notes....[App Note]How to Exclude Interference-Type Noise. What to do and
Why to do it-A Rational Approach
AN-348: Avoiding Passive-Component Pitfalls - AN-348 Analog
Devices Application Notes....[App Note]The Wrong Passive Component Can
Derail Even Best Op Amp or Data Converter. Here Are Some Basic Traps
to Watch For.
AN-349: Keys to Longer Life for CMOS - AN-349 Analog Devices
Application Notes (app note added 09/08) Here's How CMOS Can be
Protected Against Abuse
AN-354: Ask the Applications Engineer 1-Multi Troubles - AN-354
Analog Devices Application Notes....[App Note]Addresses problems often
encountered with LOG Circuits, Time Division Analog Multiplexing, and ADC
Power Strobing
AN-369: Thermocouple Signal Conditioning using the AD594/AD595 - AN-369
Analog Devices Application Notes (app note added 2/06)This application note
reviews rmocouple basics and illustrates Circuit designs for rmocouple signal
conditioning using AD594/AD595.
[_OLD-ads-dont_upload/OLD I-ADS from web/ad-djandassoc.htm]
AN38 Basic introduction to the use of the ZNI1000 Nickel Temperature Sensor -
Zetec Semiconductors Applications NotesThis application note describes
ZNI1000 temperature sensor, which uses a nickel element connected between 2 pins of a
SOT23 package to measure temperature accurately. Temperature can be measured to within
± 2°C down to -55°C and to within ± 1.5°C up to +150°C. (app note added
2/06)
AN-588: AD7416/AD7417/AD7418 Power-On Reset Circuit - AN-588 Analog Devices
Application Notes....[App Note]If a large number of decoupling capacitors are used on
VDD line, re-applying power before VDD has discharged to 0 V can cause
AD7416/AD7417/AD7418 to reset into an unknown. state.
AN-661: ADUC814 to ADM1032 via I2C® Interface - AN-661 Analog Devices
Application Notes....[App Note]Even though ADuC814 has an on-chip ±1.5°C
temperature sensor, configured through on-board ADC registers, it is often
required that a remote or external temperature sensor be used.
Copyright January, 1998 - November, 2017 David A. Johnson & Associates. All Rights reserved. Linking is ALLOWED but COPYING any content or graphics to your web site is EXPRESSLY PROHIBITED.
