The Simplified I/O Interface - This was the first of the
interface boards developed in conjunction with members of the Educational
Computing Association of Western Australia (ECAWA). This board
follows on from the "Simplified Output Interface". We wanted to be able to
experiment |
The Use Of Zetex E-Line Transistors In Motor & Solenoid Driver Functions
Within Printers: Effective Logic to High Current Load Interfacing -
Zetec Semiconductors Applications Notes A brief discussion of the
drive requirements of relatively high current inductive loads within
computer peripheral equipment, with respect to the benefits possible with
optimised small packaged components. (app note added 2/06)
|
The Wire Between Multiio Card & Joystick Connector - Some PC
multi-IO cards have a 16 pin header in the circuit board which is wired to
the joystick connector (fitter to other slot place) using flatcable. The
wiring is straight one-to-one connection but, due to the different
numbering scheme of the gameport connector vs the 16-way header, the pin
numbers don't necessarily match....(design idea 07/03) |
|
[ad-DAJ-FS-split.htm]
|
|
Theory & Application of the ML4821 Average Current Mode PFC Controller/ AN-42030 -
Fairchild Application Notes / (app note added 6/06) |
Thermal/ Impact Printer - Intersil Application Block Diagram (app note
added 6/06) |
Thermistor Thermometer - Simple thermometer made with NTC thermistor.
(circuit added 09/09) |
Thermocouple Interfaces to Serial Port - 11/09/95 EDN-Design Ideas The
circuit in Figure 1 acquires temperature data via an IBM PC serial port using a
thermocouple-based sensor. The sensor is a type-K (chromel-alumel]thermocouple. When
in contact, the dissimilar metals produce a....[Design Idea added 3/03] EDN is
migrating links. This link is not verified. Search the "title" + "EDN" for new
link. |
Three Port PC i Bridge Performance Advantages - Pericom Semiconductor
Application Note # 040 (app note added 02/05) |
Three-state switch interface uses one microcontroller pin - 21-Feb-08 Issue
of EDN A single microcontroller I/O pin senses the state of a three-position
switch.... [Design Idea by Kartik Joshi, Netaji Subhas Institute of Technology, New
Delhi, India] |
Time Switch V1.0 - New weekly scheduler made by 68HC908QY4 with kaypad and
16x1 line LCD! (not recommended) (circuit added 09/09) |
Timing Analysis Of Synchronous & Asynchronous Buses - National Semiconductor
Application Note (app note added 2/06) |
Tiny Server - Build the embedded device server with XPort. (circuit
added 09/09) |
To Analogue Converters for PC Parallel Port - (electronic schematic /
circuit added 11/05) |
TP3410 2 Biq U Interface Deviceusers Manual - National Semiconductor
Application Note (app note added 2/06) |
TP3420A Line Interface Circuit Considerations - National Semiconductor
Application Note (app note added 2/06) |
TP3420AS Interface Devicesid User's Guide - National Semiconductor
Application Note (app note added 2/06) |
Transitioning from the CS4362 to the CS4362A or CS4365 - (app note added
6/07) |
Transitioning from the CS4382 to the CS4382A or CS4385 - (app note added
6/07) |
Transmission Line RAPIDESIGNERr Operation and Applications Guide - National
Semiconductor Application Note (app note added 2/06) |
Transmitter accurately transfers voltage input - 15-May-03 Issue of EDN
When you connect remote sensors to a central process controller, a simple, robust, and
commonly used interface is the 4- to 20-mA loop. The advantages of this current loop
include the simplicity of just two twisted wires that share both power and signal, the
loop's high noise immunity in harsh environments, and the de facto loop standard
within the process-control industry.... [Design Idea by Clayton Grantham, National
Semiconductor, Tucson, AZ] |
Transmitting video over CAT5 cable - With the world dominance of personal
computer systems, demand for long distance component video transmission is increasing
at an unprecedented pace. The applications areas of greatest demand are KVM systems,
server farms, information message boards and educational classrooms.... [Mike Wong,
Intersil Corp., Director of Applications Engineering, Milpitas, CA ] |
Tricks improve on Excel LCD initialization - 11-Apr-02 Issue of EDN A
previous Design Idea on using Excel for LCD initialization relies on the user for
cutting and pasting from Excel into an editor (Reference 1]. It appears that it would
take a minimum of six keystrokes or mouse strokes from one character to a new
character to perform this operation. This procedure does not allow for the
addition of comments, which would be advantageous in the maintenance.... [Design Idea
by Aubrey Kagan, Weidmüller Ltd, Markham, ON, Canada] |