|
1-Wire Thermocouple - This article describes a method of measuring temperatures
using conventional thermocouples that are directly digitized at the cold junction. The
transducer is based on a recently introduced multifunction chip that communicates with
a PC (or microcontroller)....(app note added 08/08/08) |
|
A Thermoelectric Cooler Temperature Controller for Fiber Optic Lasers - AN89
Linear Technology This application note presents circuitry for maintaining 0.01°C
temperature control of fiber optic lasers over wide ambient range variations. The
circuitry also features high efficiency power delivery, compact size and low noise.
Detailed descriptions of circuitry and results are given with special emphasis on rmal
loop optimization. An appended.... |
|
Amplifier Thermal Protection - (circuit / schematic design added 6/06) |
|
AN-225: IC Temperature Sensor Provides Thermocouple Cold-Junction Compensation -
National Semiconductor Application Note (app note added 2/06) |
|
AN-274: Taking the Uncertainty Out of Thermocouple Temperature Measurement -
AN-274 Analog Devices Application Notes (app note added 2/06) |
|
AN-369: Thermocouple Signal Conditioning using the AD594/AD595 - AN-369 Analog
Devices Application Notes (app note added 2/06) This application note
reviews rmocouple basics and illustrates circuit designs for rmocouple signal
conditioning using AD594/AD595. |
|
AN844: Simplified Thermocouple Interfaces and Picmicro® Mcus - Microchip
Application Note Published 21-Jul-02 (app note added 6/06) |
|
Apex-AN11 Thermal Techniques - 1/2005, AN11UREVD : 359 Kb (Apex App Note added
08/08/08) |
|
Circuit provides cold junction compensation - 11/28/02 EDN-Design Ideas:
The accuracy of any circuit or system that uses a thermocouple to determine the
temperature of a process is limited by the accuracy of the method used to perform
cold-junction compensation. In a thermocouple measurement, two wires of dissimilar
metal join together at the "hot," or measurement, junction.....(design idea added
10/03) |
|
DPPs Make Nonvolatile MicroVolt DAC - 10/31/02 EDN-Design Ideas: The
availability of a seemingly limitless variety of monolithic DAC chips makes it easy to
implement most digital-to-analog-conversion applications with a single off-the-shelf
device. Sometimes, an unusual set of requirements necessitates a multichip approach,
however. One example of such a requirement is the need.....(design idea added 2/05) |
|
Freezer Over-Temperature Alarm - This electronic hobby circuit below is designed
to activate a beeper alarm, whenever the outside air temperature is below 0 degrees C
(32F). A 9v battery powers the hobby circuit. The average 9ua current is
so low that the battery should last for many years.... ….(designed by David A.
Johnson) |
|
Freezing Temperature Alarm - This circuit turns on a beeper whenever the outside
air temperature is less than zero degrees Centigrade. The circuit draws only a
few microamps from a 9 volt battery. It uses a glass bead thermistor accurate to
1 degree C. ….(designed by David A. Johnson) |
|
IC Temperature Sensor Provides Thermocouple Cold-Junction Compensation - National
Semiconductor Application Note (app note added 2/06) |
|
LB-24: Versatile IC PreAmplifier Makes Thermocouple Amplifier with Cold Junction
Compensation - National Semiconductor Application Note (app note added 2/06) |
|
Network Imitates Thermocouples - 11/08/01 EDN-Design Ideas: Thermocouples
find widespread use for temperature measurement in systems. During system design or
testing, you must observe the system's response at different temperatures. However,
it's inconvenient to heat a thermocouple.....(design idea added 09/03) |
|
Taking the Uncertainty Out of Thermocouple Temperature Measurement - AN-274 Analog
Devices Application Notes (app note added 2/06) |
|
TC74 Demo Board for Tiny Serial Digital Thermal Sensor - This allows the user to
evaluate the functionality of the tiny TC74 thermal sensor and perform comparative
evaluations against other thermal management solutions. Easy-to-use software provides
a visual representation of temperature profile and can be interfaced with any PC.
(app note added 6/06) |
|
Thermal considerations matter for Class D amplifiers - 04/27/06 EDN-Design Ideas:
(design idea added 09/06) A few basic calculations can help you estimate the
IC's die temperature. |
|
Thermal Techniques Apex-AN11 - Apex App Note (added 08/08/08) |
|
Thermocouple Interfaces to Serial Port - 11/09/95 EDN-Design Ideas: The
circuit in Figure 1 acquires temperature data via an IBM PC serial port using a
thermocouple-based sensor. The sensor is a type-K (chromel-alumel)thermocouple. When
in contact, the dissimilar metals produce a potential difference that is a function of
temperature. Additional thermocouple junctions.....(design idea added 3/03) |
|
Thermocouple Measurement - AN28 Linear Technology Considerations for
thermocouple-based temperature measurement are discussed. A tutorial on temperature
sensors summarizes performance of various types, establishing a perspective on
thermocouples. Thermocouples are then focused on. Included are sections covering
cold-junction compensation, amplifier selection, di.... |
|
Thermocouple Signal Conditioning using the AD594/AD595 - AN-369 Analog Devices
Application Notes (app note added 2/06) This application note reviews
thermocouple basics and illustrates circuit designs for thermocouple signal
conditioning using the AD594/AD595. |
|
Thermocouple Temperature Activates Relay - Voltage from a high temperature
thermocouple activates a relay when the sensor detects a temperature above 1000
degrees F. (added 7/06) ….(designed by David A. Johnson) |
|
Thermocoupler - Uses a 16F84 to read a thermocouple via a Maxim's Max6674 (design
added 6/07) |
|
Thermoelectric Cooler Temperature Controller for Fiber Optic Lasers - AN89 Linear
Technology This application note presents circuitry for maintaining 0.01°C temperature
control of fiber optic lasers over wide ambient range variations. The circuitry also
features high efficiency power delivery, compact size and low noise. Detailed
descriptions of circuitry and results are given with special emphasis on rmal
loop....(app note added 1/06) |
|
Thermoelectric cooler unipolar drive achieves stable temperatures - 12/03/07
EDN-Design Ideas: Depending on the direction of current flow, Peltier devices
can both heat and cool. |
|
Ultraprecise Instrumentation Amplifier Makes Robust Thermocouple Interface - DN302
Design Notes (Linear Technology) (app note added 6/06) |
|
Versatile IC PreAmplifier Makes Thermocouple Amplifier with Cold Junction Compensation
- National Semiconductor Application Note (app note added 2/06) |
