RF Radio Frequency
Receiver Circuits Page 7
RF Receivers:
#'s A - B
C - D E
- K L - Q
R - S T - U
V - Z
Last Updated on:
Thursday, November 30, 2017 04:30 PM |
|
Links to electronic circuits, electronic schematics, designs for engineers,
hobbyists, students & inventors:
|
|
|
TBA120 Narrowband FM Receiver - Here is a nice little receiver for
narrow-band FM reception. It can also be used to receive FSK, RTTY and PACKET
signals from the HF bands. Basic receiver sensitivity is in the region of 1uV PD
and the receiver can be tuned to almost any frequency from 100KHz up to probably
120MHz. Ok then, here is the circuit diagram.... [Design by Harry Lythall -
SM0VPO] |
TDA7000 FM Receiver - (circuit added 08/07/06) |
TDA7000 Receiver - Philips Semiconductors Application Note 193
In cordless telephone sets, a normal superheterodyne receiver is used for the
1.7MHz handset. The suppression of the adjacent The ceramic IF filter....
[Design by W.V. Dooremolen] |
TDA7088 Receiver - Site has annoying popups. The electronic
diagram of the monophonic FM receiver made with TDA7088T is shown on Pic.4.12.
If built with SMD components it can be placed in a matchbox, altogether with two
button-type batteries. The operating principle of this device is given in
the....(circuit added 08/07/06) |
|
|
The "UnFETtered Crystal Radio! - …. |
The MRX 40 Mini Receiver - (Circuit design added 8/03) |
|
[_OLD-ads-dont_upload/OLD I-ADS from web/ad-djandassoc.htm] |
|
TL431 Crystal Radio Amplifier - Here is a simple audio amplifier using a TL431
shunt regulator. The amplifier will provide room-filling volume from an ordinary crystal
radio outfitted with a long-wire antenna and good ground. The circuitry is similar in
complexity to a simple one-transistor radio but the performance is far superior. The
TL431….(added 04/05/06) |
Trimless IF VCO: Part 1: Design Considerations - This App Note explores the
design fundamentals needed to implement a trimless, fixed-frequency, IF voltage-controlled
oscillator (VCO) and points out the challenges in guaranteeing proper circuit operation.
VCOs are essential components in the architecture of most wireless systems. In
dual-conversion approaches, a fixed-frequencyAPP 711: Feb 05, 2001....[App Note]
|
Tunable IF with TDA7000 - The main motive of the mods was not that the circuit
didn't work right, but were several tries to add some kind of frequency indicator to the
receiver. The left RCA plug and associated components are witnesses to the last version,
adding a FET buffer amplifiera and taking signal from the oscillator coil. (added 02/05)
|
Two Transistor FM Transmitters (Rob van der Weijden) - A compact 2 transistor
transmitter for use at VHF frequencies…. [Andy Collison's circuit] |
Two-band radio - ….(Circuit design added 03/08) |
UltraLow Distortion IF Amplifier/ ADC Driver with Digitally Controlled Gain -
Linear Technology LT5514....[App Note] |
Using the MCP2120 for Infrared Communications - Microchip Application Note
Published 4-Jun-01 (app note added 2/06) |
Using the PIC16f639 Mcu for Smart Wireless Applications - Microchip Application
Note Published 10-Nov-04....[App Note] |
|
RF Receivers:
#'s A - B
C - D E
- K L - Q
R - S T - U
V - Z |